中板厂家,中厚板厂家,钢板生产厂家
Current location : Home >> News >> Industry

NewsNews

ContactContact

Tangshan Fengrun District Shuixin Metal Products M

Phone: +86 0315-7961111

Email: shuixinjinshu@163.com

Address: East of Shaliuhe Village, Shaliuhe Town, Fengrun District

Website: en.shuixinsteel.cn

Calculating method of steel plate weight by plate supplier​

2021-04-02 05:08:02
a

The calculation method of steel plate weight: steel plate weight = plate length × plate width × plate thickness × steel plate density, where the density is 7.85 kg/m3. If the length is 1m, the width is 0.3m, and the thickness is 2.75mm, the weight of the steel plate = 1×0.3×2.75×7.85=6.47625 kg;

The steel plate is a flat steel that is poured with molten steel and pressed after cooling. The steel plate with high steel density is flat and rectangular, which can be directly rolled or cut from a wide steel strip. Steel plates are divided by thickness, thin steel plates <4 mm (thin 0.2 mm), thick steel plates 4-60 mm, and extra-thick steel plates 60-115 mm.

The width of the thin plate is 500~1500mm; the width of the thick is 600~3000mm. Medium and heavy plate suppliers' thin plates are classified according to the density of steel plates, including ordinary steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron thin plates; according to purpose, there are oil drums. Plates, enamel plates, plates, etc.; according to the surface coating layer, there are galvanized sheets, tinned sheets, lead-plated sheets, plastic composite steel sheets, etc.

Because the steel plate is smooth and beautiful, the surface quality is good, and the dimensional accuracy is high, its mechanical properties and process performance are better than hot-rolled thin steel plates, and it is widely used. It has largely replaced hot-rolled thin steel sheets for light industry, machinery, electrical engineering, electronics, and civil use. Before leaving the factory, both sides of the steel plate (belt) are coated with neutral grease to prevent rust.

Wear-resistant steel plate refers to a special plate product used under large-area wear conditions. Commonly used wear-resistant steel plates are plate products made of ordinary low-carbon steel or low-alloy steel with good toughness and plasticity by surfacing welding with a certain thickness of alloy wear-resistant layer with high hardness and excellent wear resistance.

中厚板供应商

The label

0
Next up: None

Recent browse:

Related products

Related news

t>